After-sales Service: | Online Technical Support |
---|---|
Warranty: | 2 Years |
Type: | Float Glass |
Samples: |
depend on client′s requested
|
---|
Customization: |
---|
Shipping Cost:
Estimated freight per unit. |
about shipping cost and estimated delivery time. |
---|
Payment Method: | |
---|---|
Initial Payment Full Payment |
Currency: | US$ |
---|
Return&refunds: | You can apply for a refund up to 30 days after receipt of the products. |
---|
Suppliers with verified business licenses
Thickness | 0.76mm | |
Appearance | Surface | Smooth surface without Nick,Crease,Bond; The color band should be evenly distributed and the width of transitional region is equalized |
Band Color | Clear, Blue,Green ,Gray & others | |
Crystallite and watermarks | Crystallite Diameter exceed 2.0mm is not allowed. No visible watermarks. | |
Visible defects (impurities, bubbles, oil, drop etc.) | Defects Diameter exceed 0.5mm and allowed maximum 6 defects per 200m |
|
Defects Diameter exceed 0.5mm to tag on PVB film; Diameter less than 0.5mm in the Intensive defects area* must tag on one defect. The defects marks and places should be showed in the packing list. | ||
Thickness tolerance(mm) | Plus or Minus 0.04mm | |
Thickness and size | Uniformity ratio | At any two points from 25mm distance either horizontally or vertically of the thickness tolerance is less than 15μm; (or 50mm - less than 25μm; or 100mm - less than 50μm) |
Length (m) | Normal length | |
Width (mm) | Normal width | |
Roughness Rz | 15 -70 | |
Moisture content (%) | 0.35 - 0.55 | |
Heat shrinkage rate ( 60ºC/15min) (%) |
8.0 Max | |
Pummel value | 7 Max | |
Light transmittance (%) | 85 Min | |
Haze (%) | 0.2 - 0.4 | |
UV Screening, up to 380nm (%) | 99 | |
Tensile strength (MPa ) | 20.0 Min | |
Tensile elongation (% ) | 200 Min | |
Yellowness index (%) | 10 Max | |
*Intensive defects area: Within the 300mm diameter circle, the defect numbers is over 10 and its interval less than 5 mm. |
Packing: The pvb film is rolled by insulated with PE film and then wrapping film, cased into an aluminum foil bag by vacuum sealed, and then packing into plywood box or fiber can. (remark: The width is less than 1250mm, which can be packing into fiber can)
Thickness | Length | Clear width | Shade width |
0.76mm | 200m | 600-1600mm | 0-230mm |
Suppliers with verified business licenses