| Customization: | Available |
|---|---|
| Material: | PVB Film |
| Thickness: | 0.38mm |
|
Still deciding? Get samples of US$ 0/Square Meter
Order Sample
|
| Shipping Cost: | Contact the supplier about freight and estimated delivery time. |
|---|
| Payment Methods: |
|
|---|---|
| Support payments in USD |
| Secure payments: | Every payment you make on Made-in-China.com is protected by the platform. |
|---|
| Refund policy: | Claim a refund if your order doesn't ship, is missing, or arrives with product issues. |
|---|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| Apperarance | Surface | Smooth surface without Nick,Crease,Bond; |
| Crystallite and watermarks | Crystallite Diameter exceed 2.0mm and Visible watermarks are not allowed. | |
| Visible defects (impurities, bubbles, oil, drop etc.) | Maximum 10 defects with each one diameter exceed 0.5mm were allowed per 400m | |
| Marks defects diameter exceed 0.5mm and mark the intensive defects area( within the 300mm diameter circle, 10 defects exist with each one diameter less than 0.5mm) as one defect. The defects's marks and places also should be listed in the parcking list. | ||
| Thickness & Size Tolerance | Tolerance(mm) | ±0.02mm |
| Uniformity Ratio | At any two points from 25mm distance either horizontally or vertically of the thickness tolerance is less than 15μm; (or 50mm - less than 25μm; or 100mm - less than 50μm) | |
| Length & Width | ≥Normal Length / Width | |
| Roughness Rz (μm) | 15 -70 | |
| Moisture Content (%) | 0.35 - 0.55 | |
| Heat Shrinkage Rate ( 60ºC/15min) (%) |
8.0 Max | |
| Pummel Value | 7 Max | |
| Light Transmittance (%) | 50% ± 5 | |
| Haze (%) | 0.2 - 0.4 | |
| Tensile Strength (MPa ) | 20.0 Min | |
| Tensile Elongation (% ) | 200 Min | |
| Yellowness Index (%) | 10 Max | |
| FAQ |
1. Q: Can I have a sample order?
A: Yes, Sample is free if you agree to share the international express charges.
Contact Us and tell me your requirement of the product you want.
2. Q: What is the lead time for sample?
A: Existing sample is free and customized sample needs about 1 weeks;
3. Q: What express do you often use to send the samples?
A: Any express is available,it depends on your requirement;
4. Q: Do you have any MOQ limit?
A: It depends on the size and color;
5. Q: What's your acceptable payment term?
A: T/T or L/C. It due with T/T, that we will request 30% T/T deposit and 70% T/T against the B/L copy.
Regards.
contact: Ms Joanna Wei
){kind=link}